![]() ![]() To install a new construction fixture you’ll need to screw or nail the fixture’s frame to the ceiling joists. Recessed fixtures can be different depending on when you install the fixtures – during construction or after. For example, installing semi flush lights does not require cutting into the ceiling if a junction box exists. The process for installing specific types of fixtures is different. Non-IC Rated recessed light fixtures are generally preferred if your ceiling is not insulated. Note: If you live in Florida, you must use IC Rated new construction housings and IC Rated remodel housings. Some manufacturers offer a standard and premium IC line: the premium line may offer more options at the drawback of requiring more plenum room. Some downlights are listed for both IC and Non-IC use, but with different wattages or bulbs. A way to avoid glare would be to use a fixture such as a pendant or chandelier paired with a dimmer instead of can lighting. Manufacturers will limit the wattage that can be used in IC Rated recessed fixtures. The drawback to IC Rated recessed lights is that the light source is located closer to the trim, increasing the glare. IC Rated recessed fixtures are UL Listed specifically for this type of application. Recessed downlights that are installed in an insulated ceiling must be able to withstand the heat that the insulation causes. The benefit to deep housings is that they produce less glare, but will not fit in 2x8 construction. There are deep housings available if you have extra room.Most shallow recessed light fixtures are only 5” deep or less. ![]() Shallow recessed lighting is available if you don’t have much room. ![]() Most residential downlights top out at 7 ½” deep, meaning they will generally fit.This means when you find one, you should be able to find the rest easily with a stud finder. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |